Geller TL-550 - Setting FOOD STAMP; Setting GUEST TABLE


Setting 1L
1L means 1st line left hand side, and 12 characters can be input.
1R means 1st line right hand side, and 12 characters can be input also
If the words are correct, press
ENTER
.
To return to PROGRAM 1 MENU, press
ESC
.
4.14 Setting FOOD STAMP
Food coupon (or stamp) for livelihood assistance by the government

Setting Tax Forgiveness
0 food stamp tax forgiven on amount of food stamps tendered
1 Not forgiven

Setting Payment Type
0 Entry of food stamp tendered amount: At dollar column (Scrip)
1 Entry of food stamp tendered amount: At cent column or direct entry available (Debit)

Setting HALO (High Amount Lock Out)
Maximum amount (up to 99.99) buyable by food stamp.
To return to PROGRAM 1 MENU, press
ESC
.
4.15 Setting GUEST TABLE
It is possible to program a four-digit number as ID for each table.
Example: Assume to program ID 1234 for Table #01 and 5678 for Table # 08.
Step 1 Set the control lock at P1 position.
Step 2 Enter
15 ENTER
(To specify 15:GUEST TABLE.)
Step 3 Enter
1234 ENTER
(To input 1234 as ID# for Table #01.)
Step 4 Enter
8 DSGN
(To specify Table # 08.)
Step 5 Enter
5678 ENTER
(To input 5678 as ID# for Table #08.)
4. P1 programming
26
1
2
3
4
5
6
7
8
9
10
11
12