Geller TL-550 - Age Verification; Unit Price Display

10.2 Age Verification
The function to verify the full age or non-age of the customer to by the item, by entering
his (her) birth date. (Set
AGE
key (054), AGE TABLE (P1-10), PLU (Age table #) in
advance)
Control lock key position: R
(1) The message of “PLEASE INPUT BIRTH DATE” is displayed when the PLU, that the
age able has been programmed for, is registered without the operation of the ‘AGE’ key
at the beginning of ringing up:
Example
: Key operation Display
4 1 PLU
PLEASE INPUT BIRTH DATE
Then enter the birth date of the customer. Assume it is August 5, 1980.
0 5 0 8 8 0 AGE
FULL AGE (if not old enough, “NON AGE”)
Or
0 5 0 8 1 9 8 0 AGE
(or “AGE – 22” at your option)
When the entered number is not more than six-digit number, automatically ‘1900’ is added
to the number for the year.
(2) If the customer is old enough to buy the item the message of “FULL AGE” or “AGE-
(actual age)” is displayed due to your flag option.
If the customer is not old enough to buy the item, the message of “NON AGE or “AGE-
(actual age)” is displayed due to your flag option.
(3) If the customer is old enough, then operate
4 1 PLU
again. If, still, the customer is not
old enough, the message of “NO SALE” is displayed.
10.3 Unit Price Display
In R mode, it is possible to display the unit price of PLU by entering
00
and scanning the
barcode. If the customer wishes to buy the item, scan the barcode again. If he (she) does
not, go on registering next item. Please note it is available by pressing
00
key only (not
pressing
0
key twice).
63
10. Special Functions
1
2
3
4
5
6
7
8
9
10
11
12