Geller TL-550 - P2 programming; Setting SYSTEM FLAG

As seen in the screen at P2 control lock key position, the following program items are
included in PROGRAM 2 MENU:
As 6 items can be displayed in the screen, move to your needed item with
key or
PAGE UP
key.
The item you wish to enter can be chosen by entering (the number of item) and
ENTER
, or moving the cursor to the item and pressing
ENTER
. (When you find you
have entered in a wrong item mode, press
ESC
to return to PROGRAM 2 MENU.)
Except PASSWORD, your setting on all the program items in P2 can print for confirmation
by
PRNT
key operation.
5.1 Setting SYSTEM FLAG
Flag 1
This flag allows you to select the number
of decimals to be displayed and printed
on a receipt, and to select the method
used for registering multiple items.
Enter one of the numbers: 0 through 7, and press
ENTER
to fix your decision.
Bit#: Options: Function:
0
0 First enter the unit price, then enter the quantity
1
0.0 First enter the unit price, then enter the quantity
2
0.00 First enter the unit price, then enter the quantity
3
0.000 First enter the unit price, then enter the quantity
4
0 First enter the quantity, then enter the unit price
5
0.0 First enter the quantity, then enter the unit price
6
0.00 First enter the quantity, then enter the unit price
7
0.000 First enter the quantity, then enter the unit price
To move to next Flag, just press
PAGE UP
. If you wish to skip to Flag 10 directly, enter 10
and
DSGN
.
To return to PROGRAM 2 MENU, just press
ESC
.
1 : SYSTEM FLAG
2 : PASSWORD
3 : TRANSACTION NAME
4 : REPORT PARAMETER
5 : STARTUP NUMBER
6 : TIMER AND ALARM
7 : COM 1/2 SETUP
8 : KEY LAYOUT
9 : ROUND FOR FINALIZE
10: JOURNAL MODE
11:VERSION
27
1
2
3
4
5
6
7
8
9
10
11
12
5. P2 programming
DEPT NO = 1

NAME :ABC
PRICE : 12.30
FLAG N:1 :0 :0 :0 :0 :0
O:NO USE 1:F/STMP 2:PSET
PRICE 3:F/S & PRESET PR
P1-2 ABC