Flag 17
Enter 0 or 1 for each bit (N1 to N8), and press
ENTER
each time to fix your decision.
Bit#: Options: Function:
N1
0Always enter "0."
N2
0Always enter "0."
N3
0Display "EU" by (entering1 and) pressing the , and display "FC" by entering 2, 3 or 4 and
pressing the .
1 Display "FC" by (entering 1, 2, 3 or 4 and) pressing the .
N4
0 Calculate, display and print the change in LC when tendering operation is executed in LC.
1 Calculate, display and print the change converted in FC when tendering operation is executed
in LC.
N5
0 Depends on Flag 16, N3 selection.
1 Print nothing in the front of converted amount. (N3 of Flag 16 must be set to 0.)
N6
0 Do not print the amounts such as TAX AMOUNT and TAXABLE AMOUNT converted in
FC1(=the euro) on the receipt.
1 Print the amounts such as TAX AMOUNT and TAXABLE AMOUNT both in the local currency
and converted in FC1(=the euro) on the receipt.
N7
0 Make it an error to operate the key instead of the key.
1 Reverse the selection of the flag 16, N5 temporarily by operating the key instead of the
key.
N8
0 Do not create FC function on the key.
1Create FC function on the key.
To move to next Flag, just press
PAGE UP
. If you wish to skip to Flag 23 directly, enter 23
and
DSGN
.
To return to PROGRAM 2 MENU, just press
ESC
.
Flag 18
Enter 0 or 1 for each bit (N1 to N8), and press
ENTER
each time to fix your decision.
Bit#: Options: Function:
N1
0Print VOID2 total on full report and clerk report.
1 Do not print VOID2 total on full report and clerk report.
N2
0 Print RET2 total on full report and clerk report.
1 Do not print RET2 total on full report and clerk report.
N3
0 Set automatic PLU area in memory for unprogrammed barcode.
1 Set designated PLU area in memory for unprogrammed barcode.
N4
0Always enter "0."
N5
0Always enter "0."
N6,N7,N8
000 Print the symbol, , just before the figures of exchange rate in the receipt.(Example: 0.83991)
001 Print the symbol, #, just after the figures of exchange rate in the receipt.(Example: 0.83991#)
010 Print the symbol, *, just after the figures of exchange rate in the receipt. (Example: 0.83991*)
011 Print no symbol for the exchange rate in the receipt. (Example: 0.83991)
To move to next Flag, just press
PAGE UP
. If you wish to skip to Flag 23 directly, enter 23
and
DSGN
.
To return to PROGRAM 2 MENU, just press
ESC
.
: Refer to 3.14 Key function setting.
NOTE
+%
+%
CASH
PO
CASHPO
FC
FC
FC
5. P2 programming
35
1
2
3
4
5
6
7
8
9
10
11
12
To Next Page
Loading...
