GEM 1435 ePos - Page 24

12.3 Electrical connection with cable gland
Note: Ordering option Option code 0, 2, 4, 6
Position of the connections
X1
X3
X2
Connection X1/X2: M16 cable gland
Connection X3: M12 cable gland
Recommended cable dia-
meter:
X1 / X2: 4 - 10 mm
X3: 3.5 – 7 mm
Terminals: Wago 236
Cross section of wire: 0.5...2.5 mm² / AWG 20…12
Internal wiring:
10V
X
T
Uw+ Iw+
Iw- Uw-
X+ X- GND 24V
A1 A2
T
ERR
Key
10 V green
1)
Connection of external travel sensor
X brown
1)
┴ white
1)
I
W
+ Set value input 0 / 4-20 mA
I
W
-
U
W
+ Set value input 0 - 10 V
U
W
-
X+ Actual value output 0 - 10 V
4-20 mA (optional) - internal supply
X-
GND Supply voltage 24 V DC
24 V
Potential earth
A1 Alarm 1
A2 Alarm 2
ERR Error message output
┴ GND out
1) Core colours when using an external travel sensor
GEMÜ 4231 or 4232. Connect in the specified order.
Other external travel sensors may have different core colours.
www.gemu-group.com24 / 71GEMÜ 1435 ePos
12 Electrical connection