V20 8,5m 4x320W LED
TL193-18-09-00
17-09-2018
Italiano-English
13.9 ELEKTRISKA SKYDD – ELECTRIC PROTECTION
I det följande kapitlet beskrivs de elektriska
skydden som sitter på kontrollpanelen
The following chapter describes the electrical
protection devices featured in the control
panel.
Differential magnettermisk brytare.
Maskinen är utrustad med en magnettermisk
brytare (31) som kan säkerställa användarens
skydd vid direkt och indirekt kontakt. I dessa
fall föreskrivs i referensstandarden automatiskt
avbrott i strömförsörjningen.
RCD/MCB.
The unit is equipped with an RCBO combined
(RCD/MCB) Device (31) which guarantees
user protection against direct and indirect
contacts. Reference standard prescribes
automatic disconnection of the supply for
protection against direct and indirect
contacts.
Kontrollera regelbundet den magnettermiska
differentialbrytarens (31)funktion genom att
trycka på “TEST”-knappen på frontpanelen.
Verify periodically the operation of the
RCD/MCB (31), by pressing the “TEST” 0
button placed on the front panel.
MAGNETO THERMIC PROTECTION
Varje elektrisk belastning som försörjs av
systemet eller av nätet, ansluten till
kontrollpanelen, är försedd med tilldelat
magnettermiskt skydd:
Each load supplied by the system or by the
network, connected to the control panel is
provided by dedicated thermal magnetic
protection.
Differentialmagnettermiskt 16 A allmänt
skydd.
16 A RCD/MCB main/output protection
Termisk brytare 6 A: skydd för hydraulisk
styrenhet.
6 A circuit breaker: hydraulic gear box
protection
Termobrytare 4 A: skydd strålkastare.
4 A circuit breaker for LEDs lamps switch