Need help?Do you have a question about the Generac Power Systems VT-8 8mt and is the answer not in the manual?
General| Brand | Generac Power Systems |
|---|---|
| Model | VT-8 8mt |
| Category | Lighting Equipment |
| Language | English |
Operator responsibility for machine operation depends on their sensibility.
Read the manual carefully before operation or installation.
Manual is integral to the machine for 10 years, even if transferred.
Lists documents provided with the lighting tower, including manuals.
Pre-operation checks include protective gear, familiarization, and barriers.
Earthing must comply with local regulations and be robust for safety.
Earthing must comply with local regulations and be robust for safety.
Commentary on earthing conductor sizing based on IEC standards.
Safety precautions during maintenance include turning off the machine and using PPE.
Transport safety involves using designated lifting points and securing the machine.
Warning about touching hot surfaces like engine and floodlights when hot.
Warning about touching live parts and electric cables.
Warning against removing guards and operating on moving parts.
Safety rules for refueling to prevent fire or explosion risks.
Use ear protection against loud noises.
Exhaust gases are harmful; ensure proper ventilation and distance.
Technical specifications for the alternator.
Technical specifications for the generator.
Technical specifications for the Mitsubishi engine.
Technical specifications for the lighting tower structure.
Technical specifications for the mast raising and lowering rope.
Specifications for the 900 kg manual winch.
Detailed specifications and warnings for the winch operation.
Technical specifications for the Gewiss floodlight.
Technical specifications for the JR floodlight.
Technical specifications for the Tower Light floodlight.
Information about the metal halide lamps used in the floodlights.
Diagram identifying external components of the lighting tower.
Description and labeling of the control panel components.
Information and connection of the 12V 44Ah battery.
Instructions for filling and managing the fuel tank.
Procedure for checking and maintaining engine oil levels.
Procedure for changing the engine oil, including intervals.
Procedure for checking and maintaining radiator coolant levels.
Guidelines for selecting a suitable location for the lighting tower.
Instructions for connecting the machine's battery.
Requirements for earthing the unit as per section 7.2.
Checks to perform before each use of the machine.
Step-by-step procedure for starting the engine.
Recommendations for the engine's running-in period.
Information on using the machine, including the earth leakage circuit breaker.
Explains generator alarms and their corresponding checks.
General remarks and advice for operating the lighting tower.
Instructions on how to adjust floodlights and extract stabilizers.
Procedure for safely stopping the engine and the entire unit.
Lubrication procedure for rollers, recommending specific grease.
Lubrication of mast sections, recommending WD40.
Periodic greasing of stabilizers using dense grease.
Recommendations for lubricating winch components, avoiding brake mechanism.
Periodic checks of steel cables and pulleys for wear or damage.
Lists common problems and their causes/remedies (e.g., no start, battery issues).
Diagram and list of spare parts for the command panel.
Diagram and list of spare parts for engine support components.
Diagram of spare parts for the base of the unit.
Diagram of spare parts for the unit's carpentry.
Diagram of spare parts for the telescopic mast.
Diagram of spare parts for Gewiss floodlights.
Diagram of spare parts for JR floodlights.
Diagram of spare parts for Tower Light floodlights.
Diagram of spare parts for the slow towing trailer.
Wiring diagram for the alternator and lamp control circuits.
Wiring diagram for the ballast circuits.
Wiring diagram for engine control systems.
Wiring diagram for engine components and harness.
Wiring diagram illustrating the connection of the lamps.
Diagram showing terminal board connections and specifications.
To Next Page