1-35
01
4. Check if there is dust on the charging
connector and charging inlet.
5. Hold the charging connector handle
and connect it to the vehicle charging
inlet. Push the connector all the way
in. If the charging connector and
charging terminal are not connected
properly, this may cause a fire.
Information
Locking Charging Cable
Select ‘EV → Charging Connector
Locking Mode’ in the infotainment. The
charging connector is locked in the inlet
at a different period according to which
mode is selected.
•
Always mode: The connector locks
when the charging connector is plugged
into the charging inlet.
•
While charging mode: The connector
locks when charging starts.
For more details, refer to “Locking
charging cable” in this chapter.
6.
Connect the charging plug to the
electric outlet at a AC charging station
to start charging.
OJWEVQ011033OJWEVQ011033
7. Check if the charging indicator light
(
) of the high voltage battery in
the instrument cluster is turned ON.
Charging is not active when the
charging indicator light (
) is OFF.
When the charging connector and
charging plug are not connected
properly, reconnect the charging
cable to charge.
Information
To control the temperature of the high
voltage battery while charging or when
the battery temperature is high, the air
conditioner is used to cool down the
battery. It may generate noise or vibration
from operation of the air conditioner
compressor and cooling fan, but it is a
normal condition when charging the high
voltage battery. Also, the air conditioner’s
performance may be degraded due to
operation of the cooling system to charge
the high voltage battery. This is a normal
condition.
To Next Page
Loading...
