7-11
07
•
decrease due to the front traffic
condition or the surroundings of the
•
powered two-wheeler recognition
OJWEV071003LOJWEV071003L
• When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
•
Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
Information
The audible warning can be turned off
while collision warning or emergency
braking is operating by pressing the
hazard warning flasher button.
Junction Turning function
Warning and control
Junction Turning function will warn and
control the vehicle depending on the
collision risk level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’.
Left-hand driveLeft-hand drive Right-hand driveRight-hand drive
OJWEV071009LOJWEV071009L OJWEV071010LOJWEV071010L
Collision Warning
• To warn the driver of a collision, the
warning light will blink and the
‘Collision Warning’ warning message
will appear on the cluster, an audible
warning will sound and the steering
wheel will vibrate.
•
The function will operate when
your vehicle speed is between
approximately 10-30 km/h (6-19 mph)
and the oncoming vehicle or powered
two-wheeler speed is between
approximately 30-70 km/h (19-44
mph).
•
If a powered two-wheeler or cyclist
is detected in front, the function will
operate when your vehicle speed is
between approximately 15-70 km/h
(9-44 mph).
To Next Page
Loading...
