1-40
Foreword / Electric vehicle system overview
ORG3EVQ011055LORG3EVQ011055L
8. After charging has started, the
estimated charging time is displayed
on the cluster display for about 1
minute.
If you open the driver seat door while
charging, the estimated charging time
is also displayed on the cluster display
for about 1 minute.
Information
• Depending on the condition and
durability of the high voltage battery,
charger specifications, and ambient
temperature, the time required for
charging the battery may vary.
•
In rare cases, you might hear high
frequency noise (very little beep sound)
outside the car when charging with
400V DC charger that is deteriorated
or has long communication delay. The
high frequency noise can be generated
only when the vehicle tries to reduce its
own electromagnetic waves to keep DC
charging as possible.
Do not worry about this little beep
noise, because it is the intentional
operation of the car that does not
affect any charging performance or the
vehicle itself at all.
Checking Charging Status
When charging the high voltage battery,
the charge level can be checked from
outside the vehicle.
For more details, refer to “Charge
indicator lamp for electric vehicle” in
this chapter.
How to Disconnect DC Charger
1. Remove the charging connector
when DC charging is completed, or
after you stop charging using the DC
charger. Refer to each respective DC
charger manual for details about how
to disconnect the charging connector.
2.
Make sure to completely close the
charging door.
To Next Page
Loading...
