7-117
07
Information
• If you change the Warning Methods,
Warning Methods of other Driver
Assistance systems may change.
•
Warning Method will maintain its last
setting even if the vehicle is restarted.
•
The setting menu may not be available
for your vehicle depending on the
vehicle features and specifications.
•
With the Warning Volume in level 0,
if you deselect or adjust the Haptic
Warning to level 0, the Warning
Volume will be automatically adjusted
to volume level 2.
•
With the Haptic Warning deselected
or in level 0, if you adjust the Warning
Volume to level 0, the Haptic Warning
will be selected or automatically
adjusted to volume level 2.
•
Even if you set the warning volume to
'0', the hands off detection warning will
sound at the volume set to '1'.
operation
Basic function
Display and control
You can see the status of the Highway
Driving Assist operation in the Driving
Assist view on the cluster. Refer to "View
modes" section in chapter 4.
Highway Driving Assist will be displayed
as below depending on the status of the
function.
Operating stateOperating state Standby stateStandby state
OJWEV071151 OJWEV071151 OJWEV072297LOJWEV072297L
(1) Highway Driving Assist indicator,
whether there is a vehicle ahead
and the selected distance level are
displayed.
à Highway Driving Assist indicator
- Green : Operating state
- Grey : Standby state
- White blink: Accelerator
depressed state
- Not displayed : Off
(2)
Set speed
(3)
Lane Following Assist indicator
(4)
Whether there is a vehicle ahead and
the selected headway
(5) Whether the lane is detected or not
To Next Page
Loading...
