Genesis GV60 - Page 615

7-188
Driver assistance system
Remote Operation function operation
status
Operation
status


warning
light
Under
control
Green LED
continuously
blinks
-
Pause
Red LED
continuously
blinks
Blinks
Off
Red LED
illuminates for
4 seconds and
then turns off
Blinks 3
times and
turns off
Complete
Green LED
illuminates for
4 seconds and
then turns off
Blinks 1
time and
turns off
à Operation status by the hazard
warning light may not be applicable
based on the regulation of your
country.
à If the smart key is not within the
operating range from the vehicle
(approximately 4m (13 ft.)), the
smart key LED will not illuminate or
blink. Use the smart key within the
operating range.
How to turn off Remote Operation
function while operating
•
Press the Parking/View ( ) button
while the infotainment system screen
guides the driver using method 2.
•
Shift the gear except to P (Park)
while the infotainment system screen
guides the driver using method 2.
•
Press the Parking Safety ( ) button
or select ‘Cancel’ on the infotainment
system screen.
•
Press the Remote Start ( ) button
on the smart key while the vehicle is
being controlled by Remote Operation
function. Remote Operation function
will turn off. At this time, the vehicle
will turn off.
•
Get on the vehicle with the smart
key. Remote Operation function will
turn off. At this time, the vehicle will
remain on.
The function will pause in the following
conditions when:
•
There is a detected pedestrian, animal
or object in the direction the vehicle
is moving
•
The door or tailgate is open
•
The Forward ( ) or Backward ( )
button is not continuously pressed
• Simultaneously pressing multiple
buttons on a smart key
•
The smart key is not operated within
4
m (13 ft.) from the vehicle
•
Button of another smart key is pressed
in addition to the operating smart key