7-194
Driver assistance system
(3) When the vehicle reaches the target
parking position, a message will
appear on the infotainment system
screen to inform you that parking is
complete.
•
Smart Parking function will not
operate if the door is open or the
seat belt is not fastened.
•
The parking location indicator is
displayed on Surround View Monitor
screen and is displayed until the
vehicle enters the parking space
for the first time by Smart Parking
function.
•
Vehicle speed can be adjusted
by depressing the brake pedal
while Smart Parking function is
operating. However, the vehicle
does not accelerate even when the
accelerator pedal is depressed.
•
Depending on parking
environments, if the vehicle is
stopped by a stopper, parking may
be completed.
•
If you need to change the vehicle's
position or location, manually
complete parking your vehicle.
OJWEV071282LOJWEV071282L
(1) Shift the gear to P (Park), get out of
the vehicle with the smart key, and
close all doors.
(2)
Press and hold one of the Forward
(
) or Backward ( ) button on the
smart key. Remote Smart Parking
Assist will automatically control the
steering wheel, vehicle speed and
gearshift.
(3)
While Remote Parking function is
operating, if you do not hold down
the Forward (
) or Backward
(
) button, the vehicle will stop
and function control will pause. The
function will start operating again
when the button is pressed and held
again.
(4)
When the vehicle reaches the
target parking position, a message
will appear on the infotainment
system screen to inform you that
parking is complete. The vehicle
will automatically shift to P (Park),
engage EPB (Electronic Parking
Brake) and the vehicle will turn off.
To Next Page
Loading...
