37 DIGITAL VIDEO RECORDER
7. Schedule Recording
The schedule chart shows a graphical representation of the defined record mode: Mode1~4.
However, the schedules are only displayed if a corresponding schedule has been
configured in the schedule menu.
１. Use Direction buttons [STWX] to select “SCHEDULE” menu. Then, press
[ENTER] button to display “Schedule Chart”.
２. Use Left/Right buttons [WX] to select on TAP menu
(
).
３. Use Down button [T] to select any Day you wish to configure.
It breaks down the days of the week in eight different categories: ALL, SUN, MON,
TUE, WED, THU, FRI and SAT. ALL is for everyday of the week. Daily schedule has
priority to ALL.
４. Press [Enter] button you wish to configure. The detailed menu pops up for selected
Day, as shown below.
To Next Page
Loading...
