9.1
Section 9: Service and Maintenance
Maintenance Schedule
The following table provides a schedule of recommended Service and
Maintenance items to be completed by a trained service representative.
CAUTION: Failure to perform the recommended Service &
Maintenance may result in premature failure of the operator.
SERVICE ITEM
SERVICE INTERVAL (FREQUENCY)
EVERY 6 MO. EVERY 12 MO. EVERY 36 MO.
MONTHLY OR OR OR
5,000 CYCLES 10,000 CYCLES 30,000 CYCLE
MANUAL OPERATION
OF DOOR
CHECK DRIVE CHAINS
AND LUBRICATE
* PHOTOCELL/ SENSING EDGE
OPERATION
CHECK FOR LOOSE
OR MISSING HARDWARE
CHECK LIMIT
POSITION
GEAR TRAIN
WEAR
* If Installed.
www.geniecompany.com 08-12
Counter Door Operator
GCL-GCX
To Next Page
Loading...
Need help?
General
