GeoMax Zoom90 - Instrument Settings Configuration; Unit Settings

Settings Zoom90 | 33
5 Settings
5.1 Unit Settings
Access 1) Select Settings from the MAIN MENU.
2) Select Unit from the SETTINGS menu.
UNIT SETTINGS
DEFAULT
To set all values to factory default.
Field Description
Angle Sets the units shown for all angular fields.
gon Gon. Possible angle values: 0 gon to 399.999 gon
deg Degree decimal.
Possible angle values: 0° to 359.999°
mil Mil. Possible angle values: 0 to 6399.99mil.
° ' " Degree sexagesimal.
Possible angle values: 0° to 359°59'59''

The setting of the angle units can be changed at any time. The actual displayed values
are converted according to the selected unit.
Distance Sets the units shown for all distance and coordinate related fields.
meter Meters [m].
US-ft US feet [ft].
INT-ft International feet [fi].
Ft-in/16 US feet-inch-1/16 inch [ft].
Temperature Sets the units shown for all temperature fields.
°C Degree Celsius.
°F Degree Fahrenheit.
Pressure Sets the units shown for all pressure fields.
hPa Hecto Pascal.
mbar Millibar.
mmHg Millimeter mercury.
inHg Inch mercury.