Zoom90 | 44Care and Transport
Damp products Dry the product, the transport container, the foam inserts and the accessories at a temperature not
greater than 40°C /104°F and clean them. Remove the battery cover and dry the battery compartment.
Do not repack until everything is completely dry. Always close the transport container when using in the
field.
Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables.
7.4 Maintenance
An inspection of the motorisation in motorised instruments must be done in a GeoMax authorised service
centre. GeoMax recommends an inspection of the product every 12 months.
For instruments which are in intensive or permanent use, for example tunnelling or monitoring, the recom-
mended inspection cycle may be reduced.
To Next Page
Loading...
Need help?
General
