GeoMax Zoom90 - Atmospheric Settings

Zoom90 | 36Settings
5.4 Atmospheric Settings
Access 1) Select Settings from the MAIN MENU.
2) Select Atmos. from the SETTINGS menu.
ATMOSPHERIC
SETTINGS
DEFAULT
To set all values to factory default.
Field Description
Z(MSL) Sets the elevation above mean sea level.
Temperature Sets the temperature.
Pressure Sets the pressure.
Humidity Sets the humidity.
Atmos PPM The atmospheric ppm is calculated from the values in the previous
fields.
Refr. Coeff Refraction coefficient to be used for calculation.
Use Refr.C. If YES, refraction correction is applied to measurements.