34 35
QUICK TOUR
We recommend that you use the GEONAV intuitively, since
no damage will be caused by pressing an incorrect button.
Make sure that the GPS re-
ceiver is connected, insert
a Compact Flash™ cartridge
and press the PWR key. At
start-up, the last chart used
will be loaded by default. If
the chart is not found, the
list of NAVIONICS charts
stored into the Compact Flash™ cartridge will be displayed.
Select the desired chart by the joystick, then confirm by press-
ing ENTER.
A message will warn the user that electronic nautical charts
do not replace official government charts.
Press the PWR key to turn the display backlight on and adjust
brightness by the joystick; press PAGE to continue.
The Satellite window will show the configuration of the sat-
ellites in use.
As soon as the GPS receiver has obtained a valid fix (it can
take a few minutes), the boat’s position and the relevant area
will be displayed at the best scale available.
The default language is English. To change the language, press
PAGE to display the menu bar, then select SETUP, LANGUAGE
and the desired language by the joystick.
The line, or vector, starting from the boat indicates the boat’s
direction, to be ignored if the boat is stationary.
Two windows will display the boat’s speed, route and chart
scale.
positioning the manual cursor on the segment itself.
The color of chart items can be chosen from DAY, NIGHT or
BRIGHT. Press the PAGE key to display the menu bar, select
SETUP, DISPLAY MODE and then DAY, NIGHT or BRIGHT.
Flash
Sunshine
Functional Characteristics Quick Tour
To Next Page
Loading...
