70 71
and Currents stations. Use the joystick to choose the station
desired and to confirm.
A window will show the information reported below.
Tide station
• Name of the station
• Forecast reference date
• Time and height with respect
to the cursor’s position in the
graph
• Time and height of high/low
water
• Dawn and sunset time
• Moonrise and moonset time
• Moon phase
• Tide level graph (24 hours)
Tidal current station
• Name of the station
• Forecast reference date
• Time, speed and direction
with respect to the cursor’s
position in the graph
• Time, speed, direction and
slack time of daily flood and
ebb streams
• Dawn and sunset time
• Moonrise and moonset time
• Moon phase
• Tide level graph (24 hours)
The GEONAV will position the manual cursor at the begin-
ning of the track segment selected; insert a waypoint by press-
ing ENTER or a marker by pressing MARK.
Route to a point (Lat/Lon)
Press the GOTO key and select L/L by the joystick. Enter the
geographical coordinates desired and confirm by pressing EN-
TER.
The GEONAV will move the manual cursor to the position
selected; insert a waypoint by pressing ENTER or a marker by
pressing MARK.
Route to a point (Range/Bearing)
Use the EBL/VRM to set the bearing and the range desired
(see the EBL/VRM functions Section). Insert a waypoint by press-
ing ENTER or a marker by pressing MARK.
Tide or current forecast at the nearest survey station
NOTE: This function is available only with the NAVIONICS cartridges containing
Tides and Currents data.
This function allows displaying, within the space of twenty-
four hours with respect to the selected date, the tide level and
tidal current speed and direction at a survey station in the
vicinity.
Unlike the estimated data shown in the Info window, this
forecast is much more accurate, being supplied directly by tidal
surveying stations.
Press the GOTO key, select NEAR by the joystick, choose the
Tides or Currents service, then press ENTER to confirm. The
GEONAV will allow selecting one of the three nearest Tides
Goto
To Next Page
Loading...
