EasyManuals Logo

GeoVision GV-VS14 User Manual

GeoVision GV-VS14
185 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
[Host Settings] Enter a descriptive name for the GV-Video Server.
[Auto Reboot Setup] Select Enable to activate automatic reboot and specify the time for
reboot in the sub fields.
Day Interval: Type the day interval between each reboot.
Reboot Time: Use the drop-down lists to specify the time for automatic reboot.
Note this function is available for GV-VS04H (Firmware Version 1.03 or later), GV-VS11,
GV-VS12 (Firmware V1.04 or later) and GV-VS14.
[Repair Record Database] Click Apply to repair the database when errors occur while
playing back the recordings with the Remote ViewLog player. Problems can occur when
there are errors in firmware or damages to the storage device.
Note this function is available for GV-VS04H (Firmware Version 1.03 or later), GV-VS11,
GV-VS12 (Firmware Version 1.04 or later), and GV-VS14.
[Repair Database Status] This field displays the repairing status of database.
[Firmware Update] This field displays the firmware version of the GV-Video Server.
[System Settings] Clicking the Load Default button will make the GV-Video Server
restore factory default settings. The Ready LED on the front panel will turn off. Wait until
the Ready LED turns on and re-log in the server. After applying the default settings, you
will need to configure the GV-Video Server’s network setting again.
[Internal Temperature] This field displays the current chipset temperature inside the GV-
Video Server. Note this function is only available for GV-VS14.
[Reboot]
Clicking the Reboot button will make the GV-Video Server perform the software reset. The
Ready LED on the front panel will turn off. Wait until the Ready LED turns on and re-log in
the server.
98

Table of Contents

Other manuals for GeoVision GV-VS14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GeoVision GV-VS14 and is the answer not in the manual?

GeoVision GV-VS14 Specifications

General IconGeneral
PAL resolutions704 x 576, 704 x 576, 352 x 288, 352 x 288, 176 x 144 pixels
NTSC resolutions704 x 480, 704 x 480, 352 x 240, 352 x 240, 176 x 112 pixels
Channels quantity4 channels
Maximum frame rate30 fps
Maximum video resolution704 x 576 pixels
Video compression formatsH.264, M-JPEG
PTZ controlYes
Compatible operating systemsWindows XP\\r Windows Vista\\r Windows 7\\r Windows 8\\r Windows Server 2008\\r Windows Server 2012
Product colorBlack, White
Supported network protocolsHTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP, DynDNS, 3GPP/ISMA, Multicast, RTSP, QoS (DSCP), SNMP
Copper ethernet cabling technology100BASE-T, 10BASE-T
BNC input ports4
I/O terminal ports-
USB 2.0 ports quantity2
Ethernet LAN (RJ-45) ports1
Minimum system requirementsInternet Explorer 7+
Power requirements12V, 1.35A
Operating temperature (T-T)-20 - 55 °C
Operating relative humidity (H-H)0 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight730 g
Dimensions (WxDxH)145 x 174 x 40 mm

Related product manuals