Gerber Edge - Page 63

58 GERBER EDGE Owner's Guide
P
Parts and their functions
chassis .................................41
keypad and display...................45
platen assembly.......................43
printhead assembly...................44
Paused mode.............................48
Platen
cleaning................................38
parts and functions...................43
Print test key.............................46
Printhead
cleaning................................36
parts and functions...................44
Printing
correcting problems..................39
cutting after ...........................33
guidelines..............................32
loading material ......................26
loading the color cartridge..........28
overview................................ 9
problems...............................39
quality..................................35
sample signs .....................10, 18
setting up a job .......................25
starting.................................32
R
Registration
color to color .........................39
cutting to print........................34
mark....................................34
Rehome cam key........................46
Reset key .................................45
Resetting to factory parameters .......49
S
Safety ...................................... 3
Sample signs ........................ 10, 18
Sensors ......................... 41, 43, 44
Setting up.................................. 5
a job....................................25
adding a plotter........................ 7
adding the GERBER EDGE......... 6
connecting.............................. 6
Setup key.................................46
Setup menu...............................50
T
Telephone assistance ............... 2, 55
Troubleshooting .........................53
U
Unpacking................................. 4
V
Vinyl ......................... See Material
Vinyl slew keys .........................46