Getac K120G2 User Manual

5
Using the Tether
A tether is provided for attaching the stylus to your Tablet.
1. Thread one of the tether’s loop through the hole of the stylus (

), tie a
dead knot at the end (

), and pull the tether (

) so that the knot fills
in the hole and prevents the tether from falling off.
2. Insert the other loop to the tether hole on the Tablet (

). Then, insert
the stylus through the loop (

) and pull it tight.

Getac K120G2 Specifications

General

Brand	Getac
Model	K120G2
Category	Desktop
Language	English