67
technology for increasing the security of application code. It is used by
application developers.
Device Configuration enables or disables several hardware components.
The items available for setting depend on your model.
Diagnostics and System Tester
H2ODST Tool performs system baseline check.
Recovery Partition allows you to restore your Windows system to the
factory default state by using the “recovery partition” feature. Recovery
partition is a portion of your SSD that is set aside by the manufacturer
to hold the original image of your system.
WARNING:
Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the SSD will be lost.
Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
Windows RE launches Windows Recovery Environment. Windows RE
(Windows Recovery Environment) is a recovery environment that
provides recovery, repair, and troubleshooting tools in Windows.
Security Menu
The Security menu contains the security settings, which safeguard your
system against unauthorized use.
NOTE:
You can set the user password only when the supervisor password has
been set.
If both the supervisor and user passwords are set, you can enter any of
them for starting up the system and/or entering BIOS Setup. However,
the user password only allows you to view/change the settings of certain
items.
A password setting is applied right after it is confirmed. To cancel a
password, leave the password empty by pressing the Enter key.
Set Supervisor/User Password sets the supervisor/user password. You
can set the supervisor/user password to be required for starting up the
system and/or entering BIOS Setup.
To Next Page
Loading...
General