57
“Advanced Menu” in Chapter 5 or “G-Manager” in Chapter 6.) Otherwise,
the PowerShare USB port functions as a standard USB 3.2 Gen 1 port.
Before connecting a device for charging, make sure the device works
with the USB charging feature.
Connect a device directly to this port. Do not connect via a USB hub.
After resuming from sleep or hibernation, the computer may not detect
the connected device. If this happens, try disconnecting and
reconnecting the cable.
USB charging will stop in the following situations.
– You shut down the computer by pressing the power button for more
than 5 seconds
– All power (AC adapter and battery pack) is disconnected and then
reconnected during power-off state.
For USB devices which do not require charging, connect them to other
USB ports on your computer.
Connecting a Serial Device
Select models have a serial port for connecting a serial device such as a serial
mouse or serial communication device.
The Keyboard Dock has a serial port.
To Next Page
Loading...