68
Strong Password enables or disables strong password. When enabled,
the password you set must contain at least one upper-case letter, one
lower-case letter, and one digit.
Password Configuration sets the minimum password length. Enter the
number in the input field and select [Yes]. The number should be
between 4 and 64.
Password on Boot allows you to enable or disable the entering of
password for booting up your system.
Secure Boot Configuration (This item appears only when the password
has been set.)
Secure Boot enables or disables Secure Boot. Secure Boot is a feature
that helps prevent unauthorized firmware, operating systems, or UEFI
drivers from running at boot time.
Delete all Security Boot keys deletes all secure boot variables.
Restore Factory Defaults resets secure boot variables to manufacturing
defaults.
Set PCIe SSD 0 User Password sets the password for locking the SSD.
After setting a password, the SSD can only be unlocked by the password
no matter where it is installed.
TPM Setup Menu
Change TPM Status allows you to select between No Change and Clear.
Intel Trusted Execution Technology enables utilization of additional
hardware capabilities provided by Intel® Trusted Execution Technology.
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
Boot Type Order determines the boot order. You can rearrange the
order by dragging the boot device name up or down in the list.
Each boot device can be individually set to On or Off. If you want to
exclude a boot device from the boot order, set the device to Off.
To Next Page
Loading...