64
When and How to Use
NOTE:
The actual setting items on your model may differ from those described
in this chapter.
The availability of some setting items depends on the configuration of
your computer.
You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS
Setup Utility.
You want to restore the factory default BIOS settings.
You want to modify some specific settings according to the hardware.
You want to modify specific settings to optimize the system
performance.
To run BIOS Setup Utility:
Method 1: During system startup when the logo screen appears, tap the
screen or press the Windows Logo button on your computer. In the pre-
boot menu that appears, select Setup Utility.
NOTE:
If you don’t want any accidental tapping to invoke the pre-boot menu,
you can disable this method by setting the “Screen Tapping for Boot
Options” item in the BIOS Setup Utility.
The time period in which you can use the above method is extremely
short. You can use the other method as described below.
Method 2: Go to Settings Update & security Recovery (for Windows
10) or Settings System Recovery (for Windows 11). Under Advanced
startup, select Restart now. In the boot options menu, select Troubleshoot
Advanced options UEFI Firmware Settings. Select Restart. In the pre-
boot menu that appears, select Setup Utility.
To Next Page
Loading...