Getac S410 - Using the Bluetooth Feature

31
Using the Bluetooth Feature
The Bluetooth technology allows short-range wireless communications
between devices without requiring a cable connection. Data can be
transmitted through walls, pockets and briefcases as long as two devices are
within range.
NOTE: Do not block the antenna area.
Turning On/Off the Bluetooth Radio
To turn on the Bluetooth radio:
1. Make sure that the Airplane mode is switched off. You can control the
Airplane mode using one of the below methods.
• Press Fn+F1.
• For Windows 10: Click  Settings  Network & Internet 
Airplane mode. Slide the Airplane mode switch to the Off position.
2. If you have previously turned off the Bluetooth radio, use one of the
below methods to turn it on.
• For Windows 10: Click  Settings  Devices  Bluetooth. Slide
the Bluetooth switch to the On position.
• For Windows 7: Use Getac Quick Bar. To open Getac Quick Bar,
right-click the Getac Utility icon on Windows taskbar and select
Quick Bar. Click the Bluetooth button in the Quick Bar (an X over the
button means the radio is currently off).
Bluetooth
main antenna
Bluetooth
auxiliary antenna