Getac S410 - G-Manager

71
G-Manager
G-Manager is a unified user interface utility that allows you to view,
manage, or configure your computer features.
With G-Manager, you can perform all or some of the tasks listed below.
 View system information.
 Check the battery status and configure the battery.
 Configure ECO modes (or called power profiles).
 Set the touchscreen sensitivity mode.
 Enable PowerShare USB feature.
 Set if a warning message will appear when a connected docking station
is removed unexpectedly.
 Enable the use of external GPS/WWAN/WLAN antenna signal.
 Monitor the system.
 View the GPS information.
Right-click the Getac Utility icon located on Windows taskbar and select
G-Manager to start the program. The G-Manager window appears,
containing several tabs.
NOTE: Depending on your model, the actual items and information
appearing on the screen may differ from those shown in this manual.