Getac S410 - Using the Contactless Smart Card Reader (Optional)

43
Using the Contactless Smart Card
Reader (Optional)
Select models have a contactless smart card reader module. When an RFID/NFC
card is placed within range of the antenna (≤ 4 cm), the reader can:
 Read/write RFID (Radio Frequency Identification) tags
 Read NFC (Near Field Communication) tags
The module supports ISO15693, ISO14443A/B, Felica, and Mifare standards.
NOTE:
 For optimal results when reading an RFID/NFC tag, have the tag face the
antenna in the same orientation as indicated by the icon on the exterior
of the computer.
 When not using an RFID/NFC card, do not leave it within or near the
antenna area.
 For enhanced applications and customization of the module, contact
your authorized Getac dealer.
 The NFC reader requires specialized applications. For further
information, ask your system administrator.
Contactless s
mart
card reader
antenna area