Getac S410 - Page 73

67
 Button Setup
P1 Function
specifies the P1 quick button function to one of these
options:
– Blackout (See “
Using the Quick Buttons” in Chapter 2 for more
information.)
– Quick Btn (See “Quick Button Definition Utility” in Chapter 6 for more
information.)
– Emergency Btn (“Emergency button” only works with customized
applications that support the specific button.)
P2 Function specifies the P2 quick button function to one of these
options:
– SunLight (See “Using the Quick Buttons” in Chapter 2 for more
information.)
– ECO (See “Using the Quick Buttons” in Chapter 2 for more information.)
– Quick Btn (See “Quick Button Definition Utility” in Chapter 6 for more
information.)
 HDD Preheat keeps the hard disk drive’s temperature above 5
o
C (41
o
F)
during system shutdown period as long as external AC power is connected.
When set to Enabled, the optional heater will automatically turn on if the
hard disk drive’s temperature drops below 5
o
C (41
o
F). (The availability of
this item depends on your model.)
 Device Configuration enables or disables several hardware components.
The items available for setting depend on your model.