How to enable WLAN on Getac V100?
If you cannot use the WLAN feature on your Getac Laptop, first ensure that the mini PCI-E WLAN card is correctly installed. Next, confirm that the necessary drivers are correctly installed. Finally, verify that the WLAN feature is turned on.
Why is the numeric keypad disabled on my Getac Laptop?
If the numeric keypad is disabled on your Getac Laptop, make sure that the Num Lock is switched on by checking if the Num Lock Indicator glows.
What to do if the modem does not work on Getac V100?
If the modem on your Getac Laptop isn't working, make sure that the modem driver is correctly installed and the telephone line is properly connected. Check that the COM port in the communication software is correctly set, and ensure power management is turned off.
Why Getac V100 Laptop does not recognize a newly installed device?
If your Getac Laptop doesn't recognize a newly installed device, run the BIOS Setup program to identify the new type. Check if any device driver needs to be installed and if the device requires any jumper or switch settings. Also, check the cables or power cords for correct connections and ensure any external device with its own power switch is turned on.
What to do if Getac Laptop application program does not work correctly?
If an application program isn't working correctly: * Make sure that the software is correctly installed. * If an error message appears, consult the software program’s documentation. * If you are sure the operation has stopped, reset the computer.
What to do if Getac Laptop computer does not enter Standby or Hibernation mode automatically?
If your computer doesn't automatically enter Standby or Hibernation mode: * If connected to another computer, these modes are disabled if the connection is actively in use. * Ensure that the Standby or Hibernation time-out is enabled.
What to do if my Getac V100 Laptop does not enter Hibernation mode with the Fn+F10 hot keys?
If your Getac Laptop does not enter Hibernation mode with the Fn+F10 hot keys, make sure that the Hibernation function is specified for the sleep button. Also, you might be using an PC card that prevents the computer from entering Hibernation mode. To enter the mode, stop the communication program and then remove the card or stop the card.
Why is the sound distorted on my Getac V100 Laptop?
If distorted sound is produced on your Getac Laptop, make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound.
How to speed up hard disk drive on Getac V100 Laptop?
If the hard disk drive operations on your Getac Laptop seem slow, use a tool such as Window’s Disk Defragmenter to defragment the files.
What to do if application program does not work on Getac Laptop?
If an application program on your Getac Laptop does not work correctly, make sure that the software is correctly installed. If an error message appears, consult the software program’s documentation. If you are sure the operation has stopped, reset the computer.
Covers internal keyboard functions, touchpad usage, software keyboard, and touchscreen operation.
Details on AC adapter usage, battery charging, checking levels, and replacement procedures.
Covers accessing, navigating, and configuring BIOS settings for system optimization.
Detailed steps on how to restore the computer to its factory default Windows settings.
Provides a preliminary checklist and covers common problems like battery, display, and connectivity.
To Next Page
General
