Getinge FD1800 User Manual

<Doc_TEC><Doc_503712400><Rel_B><Lang_EN>
Page 20 av 64
Check or change a numerical value on a line without a sub-line number
• Press
(increase line number) or (reduce line number) so the display shows
the right line number. Holding down the button scrolls the value up or down for as
long as the button is pressed.
• Press:
. The numerical value for the line number is shown. The value ashes if
you are authorized to change it.
• To change the numerical value:
- If you want to change the value, press
(increase) or (reduce) until the
correct value is shown. Press
to store the new value in the memory of the
computer.
- If the value has four digits, the two digits on the left ash rst.
Change them and press
. The two digits on the right now ash and can be
changed in the same way.
- When nished, press
once more to show the line number again.
• You can also just check the numerical value without changing it:
- When you are nished, press
. This brings you back to the line number.
!#
The line number always
appears to the left on
the display
=!
The numerical value
appears to the right
on the display
Value as two digits
=!##
Value as four digits
First change the two
digits to the left…
…and then the two to
the right
!#
Line numbers always
appear to the left on the
display.
!#
!
!#
=!##
The numerical value is
shown to the left on the
bottom line of the display.

Getinge FD1800 Specifications

General

Brand	Getinge
Model	FD1800
Category	Cleaning Equipment
Language	English