Getinge FD1800 User Manual

Page 21 av 64
<Doc_TEC><Doc_503712400><Rel_B><Lang_EN>
Check or change a numerical value on a line with a sub-line number
• Press
(increase line number) or (reduce line number) so the display shows
the correct line number. Holding down the button scrolls the value up or down for
as long as the button is pressed.
• Pressrr. Now the rst sub-line number is shown. The three horizontal lines to
the left of the number show that it is a sub-line number.
• If necessary, press
(increase line number) to reach the correct sub-line number.
• Press:
. Now the numerical value of the sub-line number is shown. The value
ashes if you are authorized to change it.
• Now you can change the numerical value:
- If you want to change the value, press
(increase) or (reduce) until the
correct value is shown. Press
to store the new value in the memory of the
computer.
- When you have nished, press
once more to display the sub-line number
again.
• When you want to quit the sub-line numbers:
- Press
. This returns you to the line number.
- Now you can continue to check or change further numerical values.
Quitting the service program
If there is a value on the display, press
to return to the line number.
Press
and at the same time and hold for 4 seconds.
The line number always
appears to the left on
the display
The numerical value
appears to the right
on the display
Indicates that a sub-line
number is being displayed
))
))
Line numbers always appear
to the left on the display
!
)) !
!=
) ) ! =
=!
)) !=
!
The numerical value is
shown to the left on the
bottom line of the display
))
))
:
:
:

Getinge FD1800 Specifications

General

Brand	Getinge
Model	FD1800
Category	Cleaning Equipment
Language	English