Page 5 of 27
This sterilizer is designed to sterilize the following items with steam at tempera-
tures between 121 and 137 °C: pre-cleaned material used for medical, dental,
veterinary and cosmetic purposes
which is designed for steam sterilization.
This product is CE marked. Declaration of Conformity is attached to each
device.
This manual describes the following sterilizer versions:
o HS33 60-liters: Single manual door with Avanti display
o HS33 60-liters: Single automatic door with Avanti display
o HS33 60-liters: Double automatic door with Avanti display
o HS33 100-liters: Single manual door with Classic display
!
!
INTRODUCTION
INTENDED USE
WARNING TEXTS IN THIS MANUAL
ELECTROMAGNETIC COMPATIBILITY
HS33 steam sterilizer complies with the requirements according to the EN
61326-1 with emission limits for class B group 1 equipment and immunity
requirements according to industrial electromagnetic environment.
TRANSPORT AND STORAGE
The delivered wooden crate is intended to be used for transport and short
term storing.
The sterilizer must be shipped in a temperature between -18 and 60 °C and at
a relative humidity between 10 and 90% (non-condensing). The atmospheric
pressure must range from -500 to 3690 meters elevation.
The sterilizer must be stored indoors at temperature between +5 and +40°C.
Nominal relative humidity max. 80% at 25°C. Air in rooms shall not contain
impurities, causing corrosion. During sterilizer storage time all surfaces of
galvanized components are to be degreased. Limited period of protection
described above without represervation is 5 years. During storage sterilizers
are subject to random visual inspection of corrosion-proof protection
condition.
There are four different admonitory levels in the manual:
• WARNING!
Factor, circumstance or state that can give rise to the risk of
personal injury.
• CAUTION!
Factor, circumstance or state that can give rise to the risk of
damage to machinery or the process.
• NOTE!
Clarifi cation that facilitates the understanding of that described in
this manual.
• TIP!
Factor, circumstance or state that can facilitate execution or the
process.
To Next Page
Loading...
