GFA TS 981 - Page 45

Page 45
OPERATING STATUS DISPLAY
Adjusted cycles for maintenance reached
CLOSING operation active
Stop between the set nal limit positions
Report Status
Stop at the OPEN nal limit position
Stop at the intermediate stop position
UPWARDS travel active
ashing
ashing
Display o󰀨 = Short circuit or overload at the 24 V DC supply
Blocking of programming option conrmed.
Flashing display: Unblocking of programming option active.
Interruption of the photo cell function:
At rst interruption of the light beam.
Interruption of the photo cell function:
When exiting the programming.
Stop at the CLOSE nal limit position
Programming option is blocked
ashing
Teach in OPEN nal limit position
Teach in CLOSE nal limit position
Function for changing the rotating direction is activated, only possible during initial
operation
Change of rotating direction has been carried out, only possible during initial operation
ashing
ashing
1.4
C.3
8.8
.
.
.
.
1 . 1
1 . 1
1 . 1
1 . 1
1 . 1
1 . 1
2.4
C.S