GFI FaxMaker - Removing the Connector Manually

GFI FaxMaker Appendix 1: Microsoft Exchange 2000/2003 Connector | 45
NOTE: If the connector is not named FaxMaker SMTP Connector (for example, if it
was renamed or was manually created using a different name), remove it manually.
For more information refer to Removing the connector manually section in this
manual.
8.4 Removing the connector manually
From Microsoft Exchange, access the connector from:
1. Launch Exchange System Manager and expand Connectors node.
2. Right click FaxMaker SMTP connector and click Delete.