To Next PageTo Next Page
Need help?Do you have a question about the GILGEN SLX and is the answer not in the manual?
General| Power Supply | 230 V AC, 50/60 Hz |
|---|---|
| Control System | Microprocessor-based |
| Max. door weight (single panel) | 200 kg |
| Operating Temperature | -20°C to +50°C |
| Door Weight Capacity | Up to 200 kg |
| Application | Automatic sliding doors |
| Power Consumption | 150 W |
| Hold-open Time | Adjustable |
| Max. door width (single panel) | 3000 mm |
Specifies the intended purpose and limitations of the door drive mechanism SLX.
Explains symbols used to denote potential dangers and provides safety warnings.
Outlines general safety principles and regulatory compliance for installation and operation.
Instructs to take the installation out of operation immediately if safety is compromised.
Details the SLX-Redundant system for escape and rescue ways, including its components and fail-safe operation.
Explains the function, location, and warnings associated with the EMERGENCY STOP button.
Describes how to manually unlock the door during emergencies or power failures and lists cylinder types.
Explains how the door reacts to obstacles during closing and opening.
Details the static driving power limit and dynamic force limitation for safety.
Details the different operating modes (AUTOMATIC, NIGHT, OPEN, MANUAL, EXIT) selectable via D-BEDIX.
Defines the frequency and importance of professional maintenance and checking by specialists.
Covers error display and reset procedures for D-BEDIX, KOMBI-D-BEDIX, and BEDIX systems.
Details error display and reset procedures for C-BEDIX and KOMBI-C-BEDIX systems.
Lists possible causes and remedies for irregular door functions not indicated by error codes.
