GILGEN SLX - Safety; Appropriate Use; Safety Notices; Safety Regulations

SLX
0635-999-05---08p_2017.12.indd
0635-999/06p
Page 5 of 30
Operator manual
2 SAFETY
2.1 Appropriate use
The door drive mechanism SLXhasbeenexclusivelydesignedforoperatingsliding
wings. Any other use beyond these application limits is deemed inappropriate and inad-
missible!
The door drive unit SLX-Redundanthasbeenexclusivelydesignedforoperatingsliding
wings in escape and rescue ways.
The term "redundancy" generally refers to a function which is carried out by two functional
elements. Only one element is required for ensuring this function. The second element
onlytakesoverintheeventofafailureoftherstelement.
In the event of an inappropriate use of this system, the safety of the user may be jeopar-
dized and/or the installation be damaged. The manufacturer declines all responsibility for
these injuries/damages!
2.2 Safety notices
The present instructions uses the following symbols and notes in order to point out certain
residual dangers:
Warning:
Involving danger to life and limb.
Attention:
A situation where material could be damaged or the function impaired.
Note:
Hints which facilitate the work.
2.3 Safety regulations
2.3.1 Principles
• The installation has been calculated, designed and manufactured on the basis of the
latest state-of-the-art technology and the generally recognized safety-relevant rules and
regulations. It may only be operated if it is in perfect condition, taking into account the
specicationsofthepresentmanual.Anyusebeyondthedenedapplicationlimitsis
inadmissible!
• The installation is to be operated and maintained in such condition that the safety is
guaranteed at all times. An integral part of this condition is the appropriate use, the
compliance with the operating conditions prescribed by the manufacturer, as well as the
regular service (maintenance/checking).