GILGEN SLX - Service; Care;Checking to be Carried Out by the Operator; Switching Off

SLX
0635-999-05---08p_2017.12.indd
0635-999/06p
Page 23 of 30
Operator manual
5 SERVICE
5.1 Care/checking to be carried out by the operator
Warning:
Disconnect the installation before carrying out any work on the sliding door!
5.1.1 Switching off
• Select the operating mode MANUAL
or
• actuate the EMERGENCY STOP button (option).
5.1.2 Care
• Cleantheoorwithintheareaoftheslidingwings.Removethedirtfromanyexisting
bottom guideway once a week with a vacuum cleaner. Use tongs/pliers for removing
any solid objects from the bottom guideway.
• Clean the glass sliding wings and the side panels using a glass cleaning product custo-
mary in trade or a mild soap water.
• Clean the outside of the drive case, of the frames and of the covering with a moistened
rag.
Warning:
Do not use running water or high-pressure machines for cleaning the area of
the drive case.
Attention:
Do not use any metal brushes or chemical products for cleaning the installation.