Ginetta G58 - Switch Panel Controls

Switch Panel Controls
Switch
No.
Function Description
Latching?
1 START
Starts engine. Release when engine fires.
N
2 IGNITION
Activates engine ignition.
Y
3 STOP
Press to turn engine off. This kills the engine , then reinstates ignition after 4s. This saves
re
-
activating ignition after engine stop during a pit stop. Lift pumps continue filling the fuel
collector.
Y for 4s
4 High Beam
Activates high beam on. Main beam is always on when engine rpm >900. Also dims dash for
night & activates cockpit light power. Tail
lights active with battery to illuminate the car
when stalling during night races.
Y
5 Left Indicator
Activates left indicator.
Y
6 Right Indicator
Activates left indicator.
Y
Both Indicators Simultaneously for 3 seconds
Performs light test. All lights will illuminate to test whilst ignition is off.
Y
7 Rain
Activates rain light.
Y
8 Wipers
Activates wipers at full speed.
Y
9 Inter
Activates wipers at intermittent speed.
Y
10 Water
Activates water pumps when ignition is off to bleed the cooling system.
Y
11 AC
Activates air conditioning (Fan starts then temperature is automatically controlled).
Y
12 Front Screen Heater
Not currently an option.
Y
13 Fuel Rest
Inactive.
N/A
14 Speed Limiter
Full course yellow (code 60).
Y
15 Lift Fuel
Activates all fuel pumps to drain the cell and collector when ignition is off.
Y
16 Brake Bias Adjuster
Clockwise to wind the bias forward, anti clockwise for the rear. (1.5% per full turn)
N/A
17 Power Master Switch
Activates battery isolator.
Y
18 Fire Extinguisher Arming
Move switch up to arm the extinguisher
Y
19 Fire Extinguisher
Press to activate extinguisher (only for emergencies)
Y
20 EPAS Rotary
Adjusts the EPAS assistance. The higher the number the more assistance. Lowest position is
off
N/A
21 Circuit Breakers
Electrical trips for EPAS power steering and ABS
Y
22 ABS Rotary
Activates various levels of ABS when ignition is on.
2216
17
18
20
19
21
1
2
3
6
5
11
14
9
8
7
13 10
15
4
12
14