27
Front Anti Roll Bar Adjustment
• There are 6 blade settings for the FARB
• To adjust blade position:
• Rotate blade to desired detent setting
• 10mm socket through front face of chassis
• There is a spring detent preventing unwanted blade
rotation.
• Disconnect 1 drop link during set up
• Reconnect when set up completed
• If required adjust drop link length to remove all preload
Blade position
combinations
Wheel Rate
Soft Soft 172 N/mm
Soft Mid 198 N/mm
Mid Mid 232 N/mm
Soft Stiff 263 N/mm
Mid Stiff 328 N/mm
Stiff Stiff 559 N/mm
Soft
Stiff
Mid
Blade Settings
Blade Part Number GIN-LMP3-C021-A
To Next Page
