Engine Oil System
6
Bellhousing Hot Weather Kit Oil Level (mm)
Cast Yes 143
Cast No 216
Billet Yes 95
Billet No 133
Oil dip procedure:
1. Oil temperature at 75°C (+/- 5°C)
2. Hold engine revs at 4000RPM for 10 seconds
3. Turn off the engine using the STOP button on the switch
panel keypad
4. Measure the oil level as quickly as possible after turning
off the engine
5. Adjust the oil level if necessary using the dip stick guide
Oil measurement:
Oil catch tank:
• Ensure catch tank is drained after every session
• Measure oil out of tank to calculate oil usage per hour