Steering Wheel Position
15
Steering Wheel Height:
• Slacken top mount pinch bolt
• Hold steering wheel at desired height
• Tighten top mount to 27Nm (6mm hex key + 10mm spanner)
• Range of adjustment approx. 90mm from max to min
Steering Wheel Reach:
• Slacken two grub screws
• Remove one at a time, clean and apply Loctite 243
• Hold Steering wheel at desired reach
• Minimum column depth 83mm
• Maximum column depth 103mm
• Ensure wiring loom not caught in column slot
• Tighten grub screws to 14Nm (5mm hex key)
• Ensure grub screws are centred on flats of steering column
To Next Page
