Engine Coolant System
7
• Do not remove header tank cap with coolant temperature above 30 °C
• To set water level, reach inside header tank with one finger. Ensure fingertip is wet
• With ignition off, press “Water” on keypad to run water pumps and bleed system
• Squeeze silicone hose on pump outlets to feel for air pockets
• To further bleed the system (from dry) slacken non auto bleeds on radiators until constant water flow
• Ensure all auto bleeds have return flow to header tank
• Maximum delta temperature between cylinder heads: 10-15 °C
Ideal water
level
To Next Page
Loading...