Toe Adjustment
23
Front Adjustment:
• Toe is adjusted with a thread on the steering rack end
• Ensure car is on air jacks
• Slacken pinch bolt in steering arm
• Rotate rack end until desired toe achieved (9mm spanner)
• Torque pinch bolt to 16Nm (5mm hex key + 7mm spanner)
Rear Adjustment:
• Toe is adjusted with a Vernier adjuster on the toe link
• Ensure car is on air jacks
• Slacken pinch bolt in toe link
• Rotate Vernier adjuster until desired toe achieved (22mm spanner)
• Torque pinch bolt to 16Nm (5mm hex key + 7mm spanner)
Adjustment Front track rod length change Rear track rod length change Front toe change Rear toe change
One flat on adjuster N/A 0.46 mm N/A 1.33 mm
Quarter turn on adjuster 0.32 mm 0.69 mm 1.18 mm 2.00 mm
Half turn on adjuster 0.63 mm 1.39 mm 2.36 mm 4.00 mm
Full turn on adjuster 1.25 mm 2.77 mm 4.72 mm 8.00 mm
To Next Page
Loading...
