User Manual
46
Solis US version inverters have Seven working modes:
1. NULL
2. Volt-watt
3. Volt-Var
4. Fixed-PF
5. Reac-power
6. Power-PF
7. VgWatt-UL
Based on UL1741SA, working mode 1,3,4,7 can be used by grid operator.
7.5.8.1 Working Mode Set
7.5.8.1.1 With UL Standard selected
There are TWO situations with different grid standards selected.
This function is for maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
2. Volt-Watt (Not Required)
Description: Inverter will change the active output power based on voltage change.
Note: This Setting is NOT required by UL1741SA Standards.
1.NULL
Description: Inverter is not under any working mode.
7. Normal operation
NOTE
To Next Page
Loading...
Need help?
General
