Ginlong Solis 5G Series User Manual

User Manual
48
YES=<ENT> NO=<ESC>
Power Factor:+1.00
Figure 7.25 Fixed-PF Figure 7.26 PF Range
4.Fixed-PF
Description: Inverter will output power with fixed power factor.
Setting Range: -0.8 to +0.8
Default value is PF = 1
5. Reac-power (Not Required)
Description: Inverter will generate reactive power based on changing output power.
Note: This Setting is NOT required by UL1741SA Standards.
This function is for maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
6. P-factor (Not Required)
Description: Inverter will change power factor based on changing output power.
Note: This Setting is NOT required by UL1741SA Standards.
This function is for maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
0,6
0,6
1,0-1,0
P/Pn
under-excited
Q/Pn
under-excited
over-excited
over-excited
III
IV
III
-0,2
7. Normal operation
NOTE
NOTE

Ginlong Solis 5G Series Specifications

General

Brand	Ginlong
Model	Solis 5G Series
Category	Inverter
Language	English