GlideScope Titanium - Procedure 5. Clean the Glidescope Video Monitor; Procedure 6. Clean the Glidescope Premium Cart

46
PROCEDURE 5. CLEAN THE GLIDESCOPE VIDEO MONITOR
Ensure that you do not use any abrasive substances, brushes, pads, or tools when cleaning the video monitor
screen. The screen can be scratched, permanently damaging the device.
IMPORTANT
Clean the video monitor when it is visibly soiled and on a regular basis, as per a schedule established by the
medical care facility or provider.
1. Turn off the GlideScope Video Monitor, and then unplug the device.
2. Using 70% isopropyl alcohol (IPA),* Metrex
®
CaviWipes™,* AHP
®
Oxivir
®
,* or PDI
®
Chlorascrub™,* wipe the
exterior of the video monitor.
* Tested for 100 compatibility cycles. Exceeding the recommended number of cycles may affect the potential life of the product.
PROCEDURE 6. CLEAN THE GLIDESCOPE PREMIUM CART
Clean the cart when it is visibly soiled and on a regular basis, as per a schedule established by the medical care
facility or provider.
Table 12. Cleaning Methods for the GlideScope Premium Cart*
PRIMARY ACTIVE INGREDIENT
†
BRAND NAME CONCENTRATION
Sodium hypochlorite Clorox
®
Bleach 0.16% (1600ppm)
Hydrogen peroxide
Virox
®
Technologies Accel
®
TB Wipes
0.5%
Diversey
®
Oxivir
®
TB Wipes
Isopropyl alcohol — 70%
Quaternary ammonium
compound (alcohol-based)
PDI
®
Super Sani-Cloth
®
Germicidal Disposable Wipes 0.5%
Metrex
®
CaviWipes™ 0.28%
* All solutions have been tested for 100 compatibility cycles. Exceeding the recommended number of cycles may affect the potential life of the
product.
† See solution manufacturer’s label for additional active and inactive ingredients.
1. If you are using bleach, prepare the solution to the concentration indicated in Table 12.
Note: If you are using a product containing 5% bleach, dilute 120mL (4ounces) of bleach in 3.8L (1 gallon)
of water.
2. Using one of the solutions in Table 12, expose the cart to the cleaning solution according to the solution
manufacturer’s instructions.