INFO (Information): If the current station has a
message, the information symbol will appear on the
display. Press this button to see the message. The
message may display the artist and song title, call in
phone numbers, etc.
If the whole message is not displayed, parts of it will
appear every three seconds. To scroll through the
message at your own speed, press the INFO button
repeatedly. A new group of words will appear on
the display with each press. Once the complete
message has been displayed, the information symbol
will disappear from the display until another new
message is received. The old message can be displayed
by pressing the INFO button until a new message is
received or a different station is tuned
to.
When a message is not available from a station,
NO
INFO will be displayed.
TRAF (Traffic): Press this button
to
receive traffic
announcements. If the current tuned station does not
broadcast traffic announcements, the radio will seek to
a
station that does. When the radio finds a station that
broadcasts traffic announcements, it will stop. TRAF will
appear on the display and when a traffic announcement
comes on you will hear it. If no station is found,
NO
TRAF will appear on the display.
When a traffic announcement comes on the current
station or on
a
related network station, you will hear it,
even
if
the volume is muted or a cassette or CD is
playing. The traffic symbol and TRAF will appear on the
display while the announcement plays.
If
the cassette,
or CD player was being used, play will stop during
the announcement.
Traffic Interrupt Feature: Your radio can interrupt the
play of a cassette, or CD. Press the TRAF button.
The radio will seek
to a station that broadcasts traffic
announcements. When the radio finds a station
that broadcasts traffic announcements, it will stop.
TRAF will appear on the display. When a traffic
announcement comes on the station that was found,
you
will
hear it. When the traffic announcement is over,
the radio will resume play of the cassette, or CD.
If
no station is found, NO TRAF will appear on the display.
Radio Messages
CAL
ERR
(Calibration Error): This message is
displayed when the radio has not been calibrated
properly for the vehicle. You must return
to
the
dealership for service.
LOCKED: This message is displayed when the
THEFTLOCK@ system has locked up. You
must
return
to
the dealership for service.
3-76
To Next Page
Loading...
